RAM MOUNT UNPKD RAM TOUGH-CLAW WITH 1" DIA BASE
|
RAM MOUNT UNPKD RAM TOUGH-CLAW WITH 1" DIA BASE
1 139,-
911,20 ekskl. mva
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (2-5 arbeidsdager)
På lager
2+
|
Beskrivelse
Spesifikasjoner
Relaterte produkter
The RAP-B-400-238U consists of the small Tough-Claw base, double socket arm and diamond base adapter. The RAM Tough-Claw is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 0.625" - 1.5" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14"
- High strength glass filled nylon construction with corrosion resistant stainless steel hardware
- Rubber pads provide stable, even gripping and protection of mounting surface
- Clamp jaw is configured for round, flat and odd shapes
- Quick installation and removal of Tough-Claw™
Tekniske detaljer |
---|
Festeballens diameter | 2,54 cm |
Produktfarge | Svart |
Diskmateriale | Aluminium,Composite |
Vårt lager på Kalbakken (PUP)
På lager
1
Leverandørlager (2-5 arbeidsdager)
På lager
2+
%@>
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (2-5 arbeidsdager)
På lager
2+
%@>
RAM MOUNT RAM base, AMPS, B-size
The RAM-B-202U consists of a B Size 1" diameter rubber ball connected to a flat 2.5" diameter plate. This mount has pre-drilled holes, including the universal AMPs hole pattern.
Type: Stativ
-
Brand Compatibility: Alle merker
Vårt lager på Kalbakken (PUP)
På lager
216
Leverandørlager (2-5 arbeidsdager)
På lager
108+
%@>
RAM MOUNT RAM base, suction, B-size
The RAM-B-224-1U consists of a 3.3" diameter suction cup twist lock base that is connected to the (RAM-B-238U), diamond base with B size 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.
Type: Stativ
-
Brand Compatibility: Alle merker
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (2-5 arbeidsdager)
På lager
2+
%@>
RAM MOUNT RAM diamond adapter, B-size
The RAM-B-238U consists of a B size 1" diameter rubber ball on a 2.43" x 1.31" diamond plate. The plate has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM mounts and third party cradles.
Type: Stativ
-
Brand Compatibility: Alle merker
Vårt lager på Kalbakken (PUP)
På lager
19
Leverandørlager (2-5 arbeidsdager)
På lager
2+
%@>
RAM MOUNT RAM MOTORCYCLE BASE W HOLE M8 SCREW
Have an M8 by 25, 30, or 35mm handlebar bolt? The RAM-B-367U will replace that bolt with a standard ball-mount to put just about anything there!
Included with Purchase:
(1 QTY) 1" Rubber ball
(1 QTY) M8 x 55 bolt (1.25 thread pitch)
(1 QTY) M8 x 60 bolt (1.25 thread pitch)
(1 QTY) M8 x 65 bolt (1.25 thread pitch)
Compatible Motorcycles: Any motorcycle which employs an 8mm bolt or smaller on its structure. A smaller bolt can be used, though the load capacity decreases with the bolt size.
Vårt lager på Kalbakken (PUP)
På lager
3
Leverandørlager (2-5 arbeidsdager)
På lager
2+
%@>
RAM MOUNT RAM Rail base, U-bolt, B-size
The RAM-B-231ZU consists of a B size 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
U-Bolt Dimensions:
Accommodates rails from 0.5" to 1.25" in diameter.
Type: Stativ
-
Brand Compatibility: Alle merker
Vårt lager på Kalbakken (PUP)
På lager
8
Leverandørlager (2-5 arbeidsdager)
På lager
2+
%@>
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (2-5 arbeidsdager)
På lager
2+
%@>
RAM MOUNT UNPKD RAM CYCLE HANDLEBAR BASE W/ 1 BALL
The RAM-B-309-1U connects to your handlebar clutch/brake clamp, left or right side, and holds one 1" diameter mounting ball. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1U base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (2-5 arbeidsdager)
På lager
2+
%@>
Vårt lager på Kalbakken (PUP)
Ikke på lager
Leverandørlager (2-5 arbeidsdager)
På lager
2+
%@>
Vårt lager på Kalbakken (PUP)
På lager
1
Leverandørlager (2-5 arbeidsdager)
På lager
2+
%@>
Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et
generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er
forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som
gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er
uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.