RAM MOUNT UNPKD RAM STD ARM W EXTENSION KNOB RET
|
|
RAM MOUNT UNPKD RAM STD ARM W EXTENSION KNOB RET
Varenr.:
RAM-B-201-ALA1-KRU
The RAM-B-201-ALA1-KRU, STANDARD length double socket arm with retention knob, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. The knob extension allows for easy adjustment of the mount and prevents over loosening of the knob. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 3.69"
Socket-To-Socket Length: 3"
635,-
508,- ekskl. mva
Vårt lager på Furuset (PUP)
På lager
30
Leverandørlager (2-5 arbeidsdager)
På lager
2+
|
Beskrivelse
Spesifikasjoner
Relaterte produkter
The RAM-B-201-ALA1-KRU, STANDARD length double socket arm with retention knob, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. The knob extension allows for easy adjustment of the mount and prevents over loosening of the knob. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Tekniske detaljer |
|---|
| Festeballens diameter | 2,54 cm |
| Produktfarge | Svart |
| Diskmateriale | Aluminium |
Vekt og dimensjoner |
|---|
| Vekt | 154,2 g |
| Høyde | 94,7 mm |
Vårt lager på Furuset (PUP)
På lager
2
Leverandørlager (2-5 arbeidsdager)
På lager
2+
Vårt lager på Furuset (PUP)
Ikke på lager
Leverandørlager (2-5 arbeidsdager)
På lager
2+
RAM MOUNT RAM base, AMPS, B-size
The RAM-B-202U consists of a B Size 1" diameter rubber ball connected to a flat 2.5" diameter plate. This mount has pre-drilled holes, including the universal AMPs hole pattern.
Type: Stativ
-
Brand Compatibility: Alle merker
Vårt lager på Furuset (PUP)
På lager
171
Leverandørlager (2-5 arbeidsdager)
På lager
66+
RAM MOUNT RAM base, suction, B-size
The RAM-B-224-1U consists of a 3.3" diameter suction cup twist lock base that is connected to the (RAM-B-238U), diamond base with B size 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.
Type: Stativ
-
Brand Compatibility: Alle merker
Vårt lager på Furuset (PUP)
Ikke på lager
Leverandørlager (2-5 arbeidsdager)
På lager
2+
RAM MOUNT RAM diamond adapter, B-size
The RAM-B-238U consists of a B size 1" diameter rubber ball on a 2.43" x 1.31" diamond plate. The plate has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM mounts and third party cradles.
Type: Stativ
-
Brand Compatibility: Alle merker
Vårt lager på Furuset (PUP)
På lager
16
Leverandørlager (2-5 arbeidsdager)
På lager
2+
RAM MOUNT RAM MOTORCYCLE BASE W HOLE M8 SCREW
Have an M8 by 25, 30, or 35mm handlebar bolt? The RAM-B-367U will replace that bolt with a standard ball-mount to put just about anything there!
Included with Purchase:
(1 QTY) 1" Rubber ball
(1 QTY) M8 x 55 bolt (1.25 thread pitch)
(1 QTY) M8 x 60 bolt (1.25 thread pitch)
(1 QTY) M8 x 65 bolt (1.25 thread pitch)
Compatible Motorcycles: Any motorcycle which employs an 8mm bolt or smaller on its structure. A smaller bolt can be used, though the load capacity decreases with the bolt size.
Vårt lager på Furuset (PUP)
På lager
4
Leverandørlager (2-5 arbeidsdager)
På lager
2+
RAM MOUNT RAM Rail base, U-bolt, B-size
The RAM-B-231ZU consists of a B size 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
U-Bolt Dimensions:
Accommodates rails from 0.5" to 1.25" in diameter.
Type: Stativ
-
Brand Compatibility: Alle merker
Vårt lager på Furuset (PUP)
På lager
4
Leverandørlager (2-5 arbeidsdager)
På lager
2+
RAM MOUNT UNPKD RAM CYCLE HANDLEBAR BASE W/ 1 BALL
The RAM-B-309-1U connects to your handlebar clutch/brake clamp, left or right side, and holds one 1" diameter mounting ball. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1U base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
Vårt lager på Furuset (PUP)
Ikke på lager
Leverandørlager (2-5 arbeidsdager)
På lager
2+
Vårt lager på Furuset (PUP)
Ikke på lager
Leverandørlager (2-5 arbeidsdager)
På lager
2+
RAM MOUNT UNPKD. RAM GOPRO MOUNTING BASE 1" DIA BA
GoPro® cameras have reinvented how we capture some of the most exciting moments in our lives. Nearly two decades ago, RAM began reinventing mounting systems so that enthusiasts could use their cameras and video equipment like never before. RAM is proud to offer a sleek new adapter that will bring two revolutionary product lines together and open up a world of possibilities. While the GoPro® line of mounting accessories is nothing to scoff at, the diversity of the RAM product line is simply unmatched. Dream it. Live it. Capture it. RAM Mounting Systems and GoPro® make it possible to truly “Be a HERO™”.
The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro® adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.
Type: Stativ
-
Brand Compatibility: Alle merker
Vårt lager på Furuset (PUP)
Ikke på lager
Leverandørlager (2-5 arbeidsdager)
På lager
2+
Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et
generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er
forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som
gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er
uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.