Arctic Cooling Freezer 7 X CO
Better Price - Better Performance
The ARCTIC Freezer 7 X CO is a compact CPU cooler with one 92mm fan. It is multi-compatible with common Intel® and AMD® sockets. Due its dual ball bearing it is optimised for Continuous Operation. The Freezer 7 X CO benefits from an improved heatsink
design and a reworked heat pipe layout. In conjunction with the fan, which is optimized for high static pressure, ARCTIC was been able to significantly improve the Freezer 7 X CO's cooling performance.
Compatible with Intel & AMD Sockets
The Freezer 7 X Co is compatible with all current desktop sockets from Intel and AMD. By using the mounting frame, simple installation is possible without a need to remove the mainboard.
Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.
Offset Heat Pipes Enable Optimal Heat Dissipation
The Freezer 7 X CO uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 ° C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing
ARCTIC to grant a 6-year warranty period for the Freezer 7 X CO.
The direct touch heat pipes attached to the Freezer 7 X CO and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.
P-fan for Increased Performance
Inspired by the P-series, the Freezer 7 X CO's fan benefits from all of the advantages of P-fans:
- High static pressure for increased cooling performance
- Broad RPM range
- Lower power consumption
- Less vibration
- PWM for synchronous fan control
Direct Touch Heat Pipes
The Freezer 7 X CO uses direct touch heatpipes. This ensures that the heat to be dissipated is transferred directly to the heatpipes without an additional material layer, and transported into the heatsink via the pipes.
- Thermal Paste: MX-2 pre-applied
- Ram Clearance: no limit
- Direct Touch Ø 6 mm x 2
- Aluminium Fins x 44, Thickness: 0.4 mm
- Fan: 92 mm, 300 - 2.000 RPM (Controlled by PWM)
- Bearing: Double Ball Bearing
- Noise Level: 0.3 Sone
- Current/Voltage: 0.07 A / 12 V DC
- Connector: 4-pin Plug